C3027 BMW Fault Code
Check C3027 OBD Fault Code ReasonEngine Coolant Temperature (ECT) Circuit High Input Indicates the sensor signal is greater than Self-Test maximum. The ECT sensor maximum is 4.6 volts or -50 C (-58 F). Note on some vehicles that are not equipped with an ECT sensor, CHT can be used and can set this DTC. Open circuit in harness Sensor signal short to power Damaged PCM Improper harness connection Damaged sensor ECT V PID reading greater than 4.6 volts with key ON and engine OFF or during any engine operating mode indicates a hard fault.
C3027 Code Symptoms :
![See C3027 in engine](../obd/23.jpg)
The original multi-displacement system turned off opposite pairs of cylinders, allowing the engine to have three different configurations and displacements. C3027 code had an elaborate diagnostics procedure, including showing engine trouble codes on the air conditionning display. However, the system was troublesome, misunderstood by customers, and a rash of unpredictable failures led to the technology being quickly retired.
Diagnosis And Repairing C3027
C3027 OBD 2 code on vehicles with electronically controlled automatic transmissions, the 3-4 shift solenoid is responsible for actuating the hydraulic circuits to activate clutches or bands that change gears inside the automatic transmission.
How to fix C3027 code ?
![See C3027 repair manual](../obd/13.jpg)
- Camshaft advance mechanism binding (VCT unit)
- Clogged or faulty fuel injector (s)
- Camshaft advance mechanism binding (VCT unit)
- Faulty Camshaft Position Sensor
Some systems require that the actuator has an adequate supply of brake fluid. Low brake fluid levels can mimic the symptoms of code C3027, so consult the manual to locate the brake fluid reservoir.
Bear in mind that a low fluid level can set code C3027 on some applications, so make sure that on fluid operated systems the fluid level is up to the mark before starting an electrical diagnosis.